Monocular Night Vision Goggles Helmet

 




Monocular Night Vision Goggles Helmet has the characteristics of clear imaging, good concealment, light structure and low power consumption, and can be used by hand or installed on the head cap. 

This product is suitable for patrolling, driving, medical rescue, observation, monitoring and reading at night or in low-light environments.

Image intensifier: generation 2+
Power: CR2
Magnification: 1X
Exit pupil diameter: 5mm
Field of view: 38°
Exit pupil distance: 17mm
Focusing range: 250mm~∞
Resolution: ≤1.3mrad (illuminance 1 X 10-1x, contrast 85%)
Diopter adjustment range: + 2 diopters ~-6 diopters
Weight: 320g

Website: https://www.usmartsensor.com/portfolio/items/monocular-night-vision-goggles-helmet

Email: sales@usmartsensor.com

评论

发表评论

此博客中的热门博文

0.4 inch 800*480 Micro OLED Display AMOLED microdisplay WVGA041

图片
  WVGA041 is a 0.4 inch AMOLED microdisplay which has WVGA (800×480) resolution. The product series comprise full color, mono white, mono green and mono red display. Full digital video signal process and 804*3*484 driver units are integrated on the silicon substrate which is fabricated in 0.18μm CMOS technology.  Input video signal is compatible with ITU-R BT.601/656 standard and supports 8/16/24 bit video format. The display mode, direction, position, brightness, contrast, R/G/B offset and gamma correction can be controlled by a two-wire serial communication interface. I/O level is compatible with 1.8~3.3V CMOS standard. WVGA041 can be used in various near-to-eye systems. Website:  https://www.usmartsensor.com/portfolio/items/404493 Email: sales@usmartsensor.com
阅读全文

Micro OLED Display AMOLED driver board DRV060 HDMI-R02

图片
HDMI-R02 is an HDMI input driver board for SXGA060 Micro-OLED Display. Low power consumption Decoder can automatically detects and converts TMDS signals into digital RGB 4: 4: 4 video data compatible with the 24-bit ITU-R BT.601 interface standard. Default display setting is HDMI input, and the resolution is 1280X1024, support EDID identification.  Display center is according to the drive board center, convenient for design and optical system. One USB communication interface allow user toconfigure all register of the Decoder and Display. So user can re-configure the drive board flexible. Low-noise, low-dropout DC/DC convertor can support 5V input voltage. Website:  https://www.usmartsensor.com/portfolio/items/409174 Email: sales@usmartsensor.com  
阅读全文